Overview

Painting and Surface Finishes emphasizes hands-on skill development through complete residential finishing projects. Beginning with surface inspection and preparation, students progress through cleaning, patching, caulking, masking, priming, interior and exterior painting, cabinet and wood finishing, specialty coatings, repairs, quality inspection, and a complete practice room capstone project.

Table of Contents

  1. Chapter 1: Inspect Surfaces and Plan Paint Project
  2. Chapter 2: Set Up Painting Work Area
  3. Chapter 3: Clean, Degrease, and Prepare Surfaces
  4. Chapter 4: Patch, Fill, and Sand Wall Defects
  5. Chapter 5: Caulk Interior Trim and Joints
  6. Chapter 6: Mask Room for Clean Paint Lines
  7. Chapter 7: Prime Drywall Patches and Bare Surfaces
  8. Chapter 8: Cut In Walls and Ceilings
  9. Chapter 9: Roll Interior Walls and Ceilings
  10. Chapter 10: Paint Interior Doors and Trim
  11. Chapter 11: Paint Cabinets and Built-Ins
  12. Chapter 12: Stain and Clear Coat Interior Wood Trim
  13. Chapter 13: Refinish Small Wood Surface
  14. Chapter 14: Paint Exterior Door and Trim
  15. Chapter 15: Paint Exterior Siding Practice Wall
  16. Chapter 16: Apply Masonry, Concrete, or Garage Floor Coating
  17. Chapter 17: Spray Paint Controlled Practice Surface
  18. Chapter 18: Repair Paint Failures and Touch-Ups
  19. Chapter 19: Final Paint and Finish Quality Inspection
  20. Chapter 20: Capstone: Paint and Finish Practice Room

Learning Outcomes