Overview

Residential HVAC emphasizes hands-on skill development through real-world maintenance, repair, and installation projects. Beginning with HVAC system identification and safe work preparation, students progress through filtration, airflow improvement, ductwork inspection, duct installation, thermostat wiring, equipment maintenance, ventilation systems, indoor air quality, troubleshooting, and a complete ducted air distribution system capstone project.

Table of Contents

  1. Chapter 1: Identify and Document HVAC System
  2. Chapter 2: Shut Down and Prepare HVAC Work Area
  3. Chapter 3: Replace HVAC Filters and Service Filter Rack
  4. Chapter 4: Clean Registers, Grilles, Returns, and Airflow Paths
  5. Chapter 5: Inspect Ductwork and Diagnose Airflow Problems
  6. Chapter 6: Seal Accessible Duct Leaks
  7. Chapter 7: Insulate Accessible Ductwork
  8. Chapter 8: Install or Replace Supply Register Boot
  9. Chapter 9: Build or Repair Return Air Path
  10. Chapter 10: Install Flexible Duct Branch
  11. Chapter 11: Balance Room Airflow
  12. Chapter 12: Install Low-Voltage Thermostat
  13. Chapter 13: Inspect Furnace Cabinet and Blower Area
  14. Chapter 14: Clear and Maintain Condensate Drain Line
  15. Chapter 15: Inspect and Clean Outdoor Condenser Unit
  16. Chapter 16: Install Bathroom Exhaust Fan and Vent Duct
  17. Chapter 17: Install Dryer Vent Duct and Exterior Termination
  18. Chapter 18: Improve Indoor Air Quality
  19. Chapter 19: Diagnose Common HVAC Comfort Problems
  20. Chapter 20: Capstone: Practice Ducted Air Distribution System

Learning Outcomes