Overview

Residential Roofing develops the skills required to install a complete residential roofing system from roof deck preparation through final ridge ventilation and drainage. Students learn safe roofing practices, weatherproofing techniques, flashing installation, ventilation, gutter systems, leak repair, and roof restoration before completing a capstone roofing project.

Table of Contents

  1. Chapter 1: Inspect Roof Deck and Prepare for Roofing
  2. Chapter 2: Set Up Safe Roof Access and Fall Protection
  3. Chapter 3: Install Drip Edge and Roof Edge Protection
  4. Chapter 4: Install Ice and Water Shield at Eaves and Valleys
  5. Chapter 5: Install Synthetic Roof Underlayment
  6. Chapter 6: Snap Roofing Layout Lines
  7. Chapter 7: Install Starter Strip Shingles
  8. Chapter 8: Install Asphalt Shingles on a Simple Roof Plane
  9. Chapter 9: Shingle a Roof Valley
  10. Chapter 10: Install Step Flashing at a Sidewall
  11. Chapter 11: Install Headwall and Apron Flashing
  12. Chapter 12: Flash a Plumbing Vent or Roof Penetration
  13. Chapter 13: Install Ridge Cap Shingles
  14. Chapter 14: Install Ridge Vent and Attic Ventilation Components
  15. Chapter 15: Install Fascia, Soffit, and Roof Edge Ventilation
  16. Chapter 16: Install Gutters and Downspouts
  17. Chapter 17: Repair Damaged Shingles
  18. Chapter 18: Diagnose and Repair Common Roof Leaks
  19. Chapter 19: Replace a Small Section of Roof Decking and Shingles
  20. Chapter 20: Capstone — Roof a Small Shed or Practice Structure

Learning Outcomes